Skip to main content
FREE Delivery!|(515) 852-5557

Humboldt County, Iowa ยท Free Delivery

Bulk Aggregates for Patios in Livermore, IA

Free delivery to Livermore on every order, with loads arriving in as fast as 2 business days.

Delivering to Livermore, IA

Free delivery on every order.

  • Free delivery to Livermore
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Livermore

Crushed gravel and base materials that compact under tires.

Rock & Stone delivered to Livermore

Graded crushed stone for drainage, concrete and heavy work.

Riprap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Livermore

Decorative delivered to Livermore

Rounded stone for beds, borders and water features.

Sand delivered to Livermore

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Livermore

Soil and fill by the ton, mulch by the cubic yard.

Fill Dirt

Compactable dirt for grading, backfill and low spots

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Livermore

How delivery to Livermore works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Livermore.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Livermore addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Gravel and aggregate delivery in Livermore, IA runs on the working season. Iowa Rock Supply delivers bulk material across Humboldt County from late spring until the fall freeze.

Class A roadstone is the base most flatwork here starts from. On this ground, a pad lives or dies on what sits under it.

Ground and Conditions in Livermore

This is Des Moines Lobe ground. The soil is thick, compact pebbly loam till, and it drains slowly unless it is tiled.

Kettles and closed depressions hold water. Snowmelt and spring rain sit on top where the ground below is still frozen.

A thin base shows its failure mode fast here. The surface stays flat while the subgrade moves under it, and pavers rock at the corners.

The fix is a compacted roadstone course that carries the load down to firm, drained ground. That is why the base gets more attention than the pavers on Iowa flatwork.

Compaction waits for the frost to come out and for the flat ground to shed its spring water. Base and paver work runs from late spring to the fall freeze, and a wet spring shortens that window.

Freeze and thaw heaves gravel drives, lanes and field entrances as the ground lets go in spring. Across the Des Moines Lobe, frost depth is commonly 42 inches, and the local building official sets footing depth.

Materials for Livermore Projects

Bedding is where a patio or walkway is won. The layer under the pavers has to bed them level and stay put.

Limestone Screenings are the bedding material for pavers and flagstone. The fines let you set a stone flat and fill the joints after.

Class A Roadstone is the 3/4 inch crushed limestone base course, with the fines left in so it binds and compacts. It goes under the screenings on drives, parking pads, shed bases and farm lanes.

1 Inch Roadstone is the coarser grade, for a new drive, a soft spot or a lane that carries heavy equipment, laid under a finer surface course.

Washed Sand beds and levels under slabs and pavers, and works as sand fill where a clean, free draining grade is wanted.

Mason Sand is the fine grade for brick and block mortar, paver joints, play sand and horse arena footing.

Top Soil is screened black dirt for lawn repair, grading and bed prep around the finished work.

Delivery to Livermore and the Surrounding Area

You order online and pick a quantity by the ton or by the yard. If you are unsure of the amount, each product page has a calculator.

Sizing the load before you order keeps the work moving. A dump truck tips the material in one pile on site.

Iowa Rock Supply delivers across Humboldt County. Livermore sits in the county, and delivery covers Humboldt, Dakota City, Bode, Gilmore City and Renwick as well.

Pick your delivery date at checkout. Bulk loads go onto firm, reachable ground so the truck can tip and leave.

Questions About Gravel and Aggregate in Livermore

What gravel is best for a driveway in Livermore?

Class A roadstone is the standard Iowa base course for a drive. It is 3/4 inch crushed limestone with the fines left in, so it binds and compacts.

For a new drive or a soft spot, start with 1 Inch Roadstone, then top it with a finer surface course.

How much material will my project need?

Quantities are ordered by the ton or by the yard. The right amount depends on the area you are covering and the depth you want, and both change the total.

Each product page has a calculator to size the load, so you can order the quantity you need for the job.

Order Bulk Aggregate for Your Livermore Project

Start with the calculator on the product page and settle on a quantity. Then place your order online and choose a delivery date for your site in Livermore or anywhere in Humboldt County.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Livermore, IA

What gravel is best for a driveway in Livermore?

Class A roadstone is the standard Iowa base course for a drive. It is 3/4 inch crushed limestone with the fines left in, so it binds and compacts. For a new drive or a soft spot, start with 1 Inch Roadstone, then top it with a finer surface course.

How much material will my project need?

Quantities are ordered by the ton or by the yard. The right amount depends on the area you are covering and the depth you want, and both change the total. Each product page has a calculator to size the load, so you can order the quantity you need for the job.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.